2013年11月18日星期一

Best Juniper JN0-303 test training guide

DumpLeader is a website specifically provide the certification exam information sources for IT professionals. Through many reflects from people who have purchase DumpLeader's products, DumpLeader is proved to be the best website to provide the source of information about certification exam. The product of DumpLeader is a very reliable training tool for you. The answers of the exam exercises provided by DumpLeader is very accurate. Our DumpLeader's senior experts are continuing to enhance the quality of our training materials.

DumpLeader Juniper JN0-303 exam study guide can be a lighthouse in your career. Because it contains all JN0-303 exam information. Select DumpLeader, it can help you to pass the exam. This is absolutely a wise decision. DumpLeader is your helper, you can get double the result, only need to pay half the effort.

There are too many variables and unknown temptation in life. So we should lay a solid foundation when we are still young. Are you ready? Working in the IT industry, do you feel a sense of urgency? DumpLeader's Juniper JN0-303 exam training materials is the best training materials. Select the DumpLeader, then you will open your door to success. Come on!

Now in such a Internet so developed society, choosing online training is a very common phenomenon. DumpLeader is one of many online training websites. DumpLeader's online training course has many years of experience, which can provide high quality learning material for examinee participating in Juniper certification JN0-303 exam and satisfy all the needs of the students.

Exam Code: JN0-303
Exam Name: Juniper (Juniper networks Certified internet specialist.m(jncis-m))
One year free update, No help, Full refund!
Total Q&A: 150 Questions and Answers
Last Update: 2013-11-18

All the IT professionals are familiar with the Juniper JN0-303 exam. And everyone dreams pass this demanding exam. Juniper JN0-303 exam certification is generally accepted as the highest level. Do you have it? About the so-called demanding, that is difficult to pass the exam. This does not matter, with the DumpLeader's Juniper JN0-303 exam training materials in hand, you will pass the exam successfully. You feel the exam is demanding is because that you do not choose a good method. Select the DumpLeader, then you will hold the hand of success, and never miss it.

JN0-303 Free Demo Download: http://www.dumpleader.com/JN0-303_exam.html

NO.1 When comparing CPE and provider-provisioned VPNs (PPVPN), which two statements are true?
(Choose two.)
A. CPE VPN's require dedicated VPN aware hardware at customer site, PPVPN does not.
B. PPVPN's require dedicated VPN aware hardware at customer site, CPE VPN's does not.
C. CPE VPN's scale better than PPVPN's as they do not require a per site configuration on the CPE.
D. PPVPN's scale better than CPE VPN's as they do not require a per site configuration on the CPE.
Answer: AD

Juniper   JN0-303   JN0-303 practice test   JN0-303 test questions   JN0-303 pdf   JN0-303 questions

NO.2 In what PIM topology would you use MSDP within a single domain?
A. Auto-RP
B. Anycast RP
C. Bootstrap router
D. PIM sparse mode
Answer: B

Juniper exam simulations   JN0-303   JN0-303   JN0-303 exam

NO.3 What are three examples of a provider-provisioned VPN supported by JUNOS software? (Choose
three.)
A. L2F
B. PPTP
C. Circuit cross-connect
D. Draft-Martini-based VPNs
E. Draft-Kompella-based VPNs
Answer: CDE

Juniper   JN0-303 practice test   JN0-303 questions   JN0-303 dumps

NO.4 Which represents a correct PE-PE BGP configuration for an L3 VPN?
A. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
neighbor 192.168.16.1;
}
B. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
any;
}
neighbor 192.168.16.1; }
C. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
unicast;
}
family inet-vpn {
unicast;
neighbor 192.168.16.1;
}
D. [edit]
lab@Amsterdam# show protocols bgp
group int {
type internal;
local-address 192.168.24.1;
family inet {
13-vpn;
}
neighbor 192.168.16.1;
}
Answer: C

Juniper study guide   JN0-303   JN0-303 original questions   JN0-303 exam prep   JN0-303 exam dumps   JN0-303 original questions

NO.5 PE1 has connections to VPN sites that are served by three remote PE routers. How many LSP's must
be established to support 2547bis?
A. an LSP for each local CE device
B. an LSP for each remote PE device
C. an LSP for each remote CE device
D. an LSP for each CE facing interface
Answer: B

Juniper   JN0-303 demo   JN0-303   Braindumps JN0-303   JN0-303 Bootcamp

NO.6 Which two multicast groups support Auto-RP mapping and discovery? (Choose two.)
A. 224.0.0.39
B. 224.0.1.39
C. 224.0.0.40
D. 224.0.1.40
Answer: BD

Juniper   JN0-303   JN0-303   JN0-303

NO.7 Which two mechanisms control route distribution between PE routers in a 2547bis VPN? (Choose
two.)
A. Site ID
B. Policies
C. Circuit ID
D. Extended communities
Answer: BD

Juniper   JN0-303   JN0-303   JN0-303

NO.8 Which LSA is the Type 10?
A. Router LSA
B. Opaque LSA
C. AS attributes LSA
D. ASBR summary LSA
E. Network summary LSA
Answer: B

Braindumps Juniper   JN0-303   JN0-303   JN0-303

NO.9 In JUNOS software, which three are valid encapsulation types for CCC? (Choose three.)
A. hdlc-ccc
B. atm-cell-ccc
C. cisco-hdlc-ccc
D. ethernet-vlan-ccc
E. ethernet-snap-ccc
Answer: BCD

Juniper   JN0-303 test questions   JN0-303 exam prep   JN0-303 test answers

NO.10 An OSPF non-backbone area allows external routes to be flooded within the area. These external
routes are
propagated into other areas. However, external routes from other areas are not allowed to enter this area.
Which type of
OSPF area does this describe?
A. stub area
B. transit area
C. border area
D. not-so-stubby area
Answer: D

Juniper   JN0-303   JN0-303 certification training   JN0-303   JN0-303   JN0-303 exam prep

NO.11 Which JUNOS software operational-mode command displays the status of a Draft-Martini VPN?
A. show ldp neighbor
B. show martini connections
C. show l2circuit connections
D. show l2vpn connections
Answer: C

Juniper   JN0-303   JN0-303   JN0-303

NO.12 What is the administrative scoping address range associated with global scope?
A. 224.0.0.0/24
B. 239.128.0.0/10
C. 239.192.0.0/14
D. 224.0.1.0?38.255.255.255
Answer: D

Juniper test questions   JN0-303   JN0-303 questions   JN0-303 study guide

NO.13 In JUNOS software, what is required to redistribute RIP routes into OSPF?
A. Apply an export policy in RIP.
B. Apply an import policy in RIP.
C. Apply an export policy in OSPF.
D. Apply an import policy in OSPF.
Answer: C

Juniper braindump   JN0-303   JN0-303

NO.14 In JUNOS software, which type of VPN supports IPX and Appletalk?
A. Martini based VPN's
B. 2547bis based VPN's
C. Sham link based VPN's
D. Virtual Router based VPN's
Answer: A

Juniper Bootcamp   JN0-303   JN0-303   JN0-303   JN0-303

NO.15 What prevents routing loops when MSDP is configured across multiple domains?
A. PIM-SM
B. Scoping
C. Auto-RP
D. MBGP
Answer: D

Juniper exam   JN0-303   JN0-303 exam dumps

NO.16 What are two commands that can be used to configure MBGP for multicast? (choose two)
A. Under the BGP group, configure family inet any
B. Use the set protocol MBGP command to enable MBGP
C. Under the BGP group, configure family inet multicast
D. Use the set rib-group command to copy the multicast routes into inet.1
Answer: AC

Juniper   JN0-303   JN0-303   JN0-303   JN0-303   Braindumps JN0-303

NO.17 Which multicast mode does Auto-RP require?
A. Link-mode
B. Dense mode
C. Sparse mode D. Sparse-dense mode
Answer: D

Juniper   JN0-303 certification   JN0-303 pdf   JN0-303 study guide   JN0-303 test

NO.18 Which two steps are required for a Kompella Layer 2 VPN? (Choose two.)
A. Configure a site ID for each CE
B. Configure a VPN label for each VPN
C. Configure a MP-BGP session to each PE
D. Configure an Extended LDP Session to each PE
Answer: AC

Juniper study guide   JN0-303   JN0-303 dumps

NO.19 Which three RP election mechanisms are available in a PIM-SM domain? (Choose three.)
A. Static
B. Auto-RP
C. Dynamic-RP
D. Bootstrap router
Answer: ABD

Juniper   JN0-303   JN0-303 questions   JN0-303   JN0-303 test answers

NO.20 What is the Draft-Kompella control plane based on?
A. IGP
B. LDP
C. BGP
D. MPLS
Answer: C

Juniper   Braindumps JN0-303   JN0-303 test questions   JN0-303

DumpLeader offer the latest 70-684 exam material and high-quality HP0-J61 pdf questions & answers. Our 700-101 VCE testing engine and MB7-702 study guide can help you pass the real exam. High-quality HP3-C29 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.dumpleader.com/JN0-303_exam.html

没有评论:

发表评论