JN0-314 questions and answers

Many candidates who are ready to participate in the Juniper certification JN0-314 exam may see many websites available online to provide resources about Juniper certification JN0-314 exam. However, DumpLeader is the only website whose exam practice questions and answers are developed by a study of the leading IT experts's reference materials. The information of DumpLeader can ensure you pass your first time to participate in the Juniper certification JN0-314 exam.

Juniper JN0-314 is a certification exam to test IT expertise and skills. If you find a job in the IT industry, many human resource managers in the interview will reference what Juniper related certification you have. If you have Juniper JN0-314 certification, apparently, it can improve your competitiveness.

Passing JN0-314 exam is not very simple. JN0-314 exam requires a high degree of professional knowledge of IT, and if you lack this knowledge, DumpLeader can provide you with a source of IT knowledge. DumpLeader's expert team will use their wealth of expertise and experience to help you increase your knowledge, and can provide you practice questions and answers JN0-314 certification exam. DumpLeader will not only do our best to help you pass the JN0-314 certification exam for only one time, but also help you consolidate your IT expertise. If you select DumpLeader, we can not only guarantee you 100% pass JN0-314 certification exam, but also provide you with a free year of exam practice questions and answers update service. And if you fail to pass the examination carelessly, we can guarantee that we will immediately 100% refund your cost to you.

Add DumpLeader's products to cart now! You will have 100% confidence to participate in the exam and disposably pass Juniper certification JN0-314 exam. At last, you will not regret your choice.

Exam Code: JN0-314
Exam Name: Juniper (Junos Pulse Access Control, Specialist (JNCIS-AC))
One year free update, No help, Full refund!
Total Q&A: 115 Questions and Answers
Last Update: 2013-11-18

Now in this time so precious society, I suggest you to choose DumpLeader which will provide you with a short-term effective training, and then you can spend a small amount of time and money to pass your first time attend Juniper certification JN0-314 exam.

If you attend Juniper certification JN0-314 exams, your choosing DumpLeader is to choose success! I wish you good luck.

DumpLeader Juniper JN0-314 exam training materials praised by the majority of candidates is not a recent thing. This shows DumpLeader Juniper JN0-314 exam training materials can indeed help the candidates to pass the exam. Compared to other questions providers, DumpLeader Juniper JN0-314 exam training materials have been far ahead. uestions broad consumer recognition and reputation, it has gained a public praise. If you want to participate in the Juniper JN0-314 exam, quickly into DumpLeader website, I believe you will get what you want. If you miss you will regret, if you want to become a professional IT expert, then quickly add it to cart.

JN0-314 Free Demo Download: http://www.dumpleader.com/JN0-314_exam.html

NO.1 A customer has purchased a third-party switch to use for Layer 2 access with their Junos Pulse Access
Control Service. When configuring the switch on the Junos Pulse Access Control Service, the customer
does not find a make/model entry for it.
Which two actions should the customer take to make the switch work with the Junos Pulse Access Control
Service? (Choose two.)
A. Add the switch to the Junos Pulse Access Control Service as a standard RADIUS.
B. Add the switch to the Junos Pulse Access Control Service using the "Any" make/model.
C. Add the switch as a firewall enforcer.
D. Obtain and configure the RADIUS dictionary for the switch and use that vendor listing for the
make/model.
Answer: A,D

Juniper test questions   JN0-314 Bootcamp   JN0-314   JN0-314 questions   JN0-314

NO.2 What is a type of firewall enforcer supported by the Junos Pulse Access Control Service.?
A. Checkpoint firewall
B. SRX Series device
C. DP sensor
D. MX Series device
Answer: A

Juniper original questions   JN0-314 certification   JN0-314 braindump   JN0-314

NO.3 You want to ensure that users who access the company's protected resources present a client
certificate before they are allowed to sign in.
What should you configure?
A. A certificate authentication policy that allows all users and remembers certificate information while the
user is signed in.
B. A certificate authentication policy that only allows users with a client-side certificate signed by a trusted
client CA to sign in.
C. A certificate role restriction that allows all users and remembers certificate information while the user is
signed in.
D. A certificate role restriction that only allows users with a client-side certificate signed by a trusted client
CA to sign in.
Answer: B

Juniper   JN0-314   JN0-314 questions   JN0-314 exam

NO.4 You navigate to "UAC" > "Infranet Enforcer" > "Auth Table Mapping" in the admin GUI. You see one
policy, which is the unmodified, original default policy.
Which statement is true?
A. Dynamic auth table mapping is not enabled.
B. A successful authentication attempt will result in a new authentication table entry, which will be
delivered only to the Junos enforcer protecting the network from which the user has authenticated.
C. To create a static auth table mapping, you must delete the default policy.
D. The default policy applies only to the factory-default role User.
Answer: A

Juniper   JN0-314   JN0-314

NO.5 You are configuring an IPsec routing policy that will be used with a ScreenOS firewall enforcer. What
must you also configure?
A. Source IP policies on the ScreenOS device
B. ScreenOS IPsec policies on the Junos Pulse Access Control Service
C. VPN NAT traversal on the ScreenOS device
D. Source interface policies on the Junos Pulse Access Control Service
Answer: B

Juniper   JN0-314   JN0-314 exam prep   JN0-314 test questions   JN0-314

NO.6 What are two ways to access the Junos Pulse Access Control Service? (Choose two.)
A. admin GUI
B. Telnet
C. SSH
D. console
Answer: B,C

Juniper   JN0-314   JN0-314 pdf   JN0-314   JN0-314 practice questions   JN0-314

NO.7 You are configuring an active/passive cluster of SRX Series devices as the firewall enforcer on a MAG
Series device. Which statement is true?
A. Multiple Infranet Enforcer instances are created with a single serial number of an SRX Series device
defined in each configuration.
B. A single Infranet Enforcer instance is created with both serial numbers of the clustered SRX Series
devices defined in the configuration.
C. Multiple Infranet Enforcer instances are created with a single IP address of an SRX Series device
defined in each configuration.
D. A single Infranet Enforcer instance is created with the VIP of the clustered SRX Series device defined
in the configuration.
Answer: B

Juniper certification   JN0-314   JN0-314 answers real questions   JN0-314 questions   JN0-314   JN0-314 test questions

NO.8 You have a Junos Pulse Secure Access Service acting as an IF-MAP client, configured to federate all
user roles to a Junos Pulse Access Control Service acting as an IF-MAP Federation server. A remote user
using Junos Pulse logs in to the Junos Pulse Secure Access Service; the Junos Pulse Secure Access
Service provisions a remote access session for that user.
What happens next?
A. The Junos Pulse Secure Access Service redirects the user to the Junos Pulse Secure Access Service
for authentication
B. The Junos Pulse Access Control Service provisions enforcement points to enable resource access for
that user.
C. The Junos Pulse Secure Access Service publishes user session and role information to the IFMAP
Federation server,
D. The Junos Pulse Secure Access Service provisions enforcement points to enable resource access for
that user.
Answer: C

Juniper   JN0-314 questions   JN0-314 exam prep

NO.9 You have a firewall enforcer protecting resources in a data center. A user is experiencing difficulty
connecting to a protected resource.
Which two elements must exist so the user can access the resource? (Choose two.)
A. Resource access policy on the MAG Series device
B. IPsec routing policy on the MAG Series device
C. General traffic policy blocking access through the firewall enforcer
D. Auth table entry on the firewall enforcer
Answer: A,D

Juniper   JN0-314 braindump   JN0-314 exam simulations   JN0-314

NO.10 A customer wants to create a custom Junos Pulse configuration. Which two are required? (Choose two)
A. Connection set
B. Configuration set
C. Custom installer
D. Component set
Answer: A,D

Juniper   JN0-314 exam simulations   JN0-314 demo   JN0-314   JN0-314   JN0-314

NO.11 Click the Exhibit button.
What is the cause of the error shown in the exhibit?
A. A RADIUS request is being received from a device that is not configured on the RADIUS Client page.
B. A user entered an incorrect password during RADIUS authentication.
C. A RADIUS proxy attempt failed to reach the configured proxy server.
D. The RADIUS shared secret is incorrect.
Answer: A

Juniper   JN0-314   JN0-314   JN0-314 practice test

NO.12 A customer is trying to decide which 802.1X inner protocol to use on their network. The customer
requires that no passwords be sent across the network in plain text, that the protocol be supported by the
Windows native supplicant, and that the protocol supports password changes at Layer 2.
Which protocol would meet the customer's needs?
A. EAP-TLS
B. EAP-MD5
C. PAP
D. EAP-MSCHAPv2
Answer: D

Juniper dumps   JN0-314 certification   JN0-314   JN0-314

NO.13 Which three settings are accessible from the serial console menu on a MAG Series device? (Choose
three.)
A. The ping command
B. Factory default reset
C. Personality image
D. License imports
E. Admin login credentials
Answer: A,B,E

Juniper certification training   JN0-314 exam dumps   JN0-314 pdf   JN0-314 pdf

NO.14 A user's Junos Pulse client uses 802.1X to access a wired network and is failing to authenticate. You
run a packet capture from the user's PC and notice that immediately after the client machine sends an
EAPoL-start packet, an EAP-failure packet is returned. You review the RADIUS troubleshooting logs on
the MAG Series device and do not see any authentication attempts from the user. Other users on the
same Ethernet switch are successfully authenticating.
Which device is sending the EAP-failure packet to the workstation?
A. The RADIUS server
B. The EAPoL server
C. The workstation's network adapter
D. The Ethernet switch
Answer: D

Juniper answers real questions   JN0-314   JN0-314   JN0-314 certification training   JN0-314

NO.15 What is the function of Host Checker?
A. To allow clientless access to the network
B. To restrict access to protected resources on the network
C. To scan an endpointfor compliance with security policies
D. To push a firewall policy to the endpoint's local firewall application
Answer: B

Juniper   JN0-314   JN0-314   JN0-314

DumpLeader offer the latest 000-656 exam material and high-quality BCP-340 pdf questions & answers. Our C_TSCM62_65 VCE testing engine and 9L0-620 study guide can help you pass the real exam. High-quality 70-688 dumps training materials can 100% guarantee you pass the exam faster and easier. Pass the exam to obtain certification is so simple.

Article Link: http://www.dumpleader.com/JN0-314_exam.html